One Room Challenge-Spring 2020-Laundry Room Makeover Week 5 & 6
Thanks for joining me in the Spring 2020 edition of the One Room Challenge with Better Homes and Gardens! I have been making over my laundry room, and to recap you can see Week 1 here with the horrifying Before pictures (trust me, you’ll want to see it!) and my design plan. Week 2 was finding inspiration, clearing out the space, and finding an unwanted surprise. In Week 3, I started laying the peel and stick tile. In Week 4, I showed how to lay peel and stick tile. Finally, this week I will show you how to install this DIY wall treatment for under $1!!!
This beautiful picture from my friend Chauntel @chauntelloiusedesigns was my inspiration. You’ll never guess what she used! A 98 cent roll of electrical tape!!! Did you guess right??? You can bet I high-tailed it to my local Ace Hardware and bought a roll! The material was just what I was wanting-cheap and easy to apply, and easy to remove! The possibilities of pattern are endless! And if you throw in other kinds of tape that you can use, like Washi tape, the colors are endless too! Just follow these simple steps, or come up with your own, and you can create a DIY wall treatment for under $1!
This post contains affiliate links.
~3 or 4 foot level. If you can find one with a ruler on it, that would be even better!
~Yardstick (if not using a level with inches)
~Tape measure (not necessary, but helpful!)
~Electrical tape ( I bought mine at Ace Hardware for 98 cents)
1) Come up with a design or pattern
This pattern that my friend Chauntel @chauntelloiusedesigns used was my original plan.
Once I started it, I realized that I wanted to space out the lines more. My original spacing was 3 inches apart, but I changed to 6 inches. The great thing about this tape is that it’s removeable and reuseable! I just scooted the tape over and pressed it down again.
Once I had all of my vertical strips up, it looked a little plain, so I added the cross-hatches for more impact. Just a few more minutes of work, and it added such a bolder look!
Look at this amazing pattern created by @uproardecor using gold washi tape!
The possibilities of design options are endless!
2) Cut strips of tape
Cut a whole bunch of strips at once to make the process go quickly. Mine are all 3 inches long.
3) Apply to wall
You can use pencil to mark out your design in advance, or just go ahead and apply tape to the wall. I did not mark in advance, and it went fine. If I needed to change anything, I just removed the tape and reapplied it to where I wanted it to go.
For my design, I just eyeballed a starting point on the wall, I did not do any math or measurements to find center, etc. But you can! My strips are 12 inches from the outside edge of one to the inside edge of the next strip.
Use a level to be sure that the yardstick is level, then tape the yardstick to the wall to serve as a guide so that your strips are straight. When you complete the area that the yardstick covers, slide the yardstick over, used the level again, and tape the yardstick to the wall again. It was a quick process, but if you have an extra set of hands, that would really help on this step! Repeat this process as you go row by row.
If you are doing the cross-hatch, just used equal lengths of tape strips (I used 3 inches) and centered the first one on, just eye-balling it. Align the yardstick under the strip and use the level process above to tape the yard stick on the wall.
Align the level vertically to line up the edge of the upper row of strips to the row you are now working on. This is also where an extra set of hands would be helpful!
It truly is so quick and easy! You can use one of these patterns, or come up with your own! Electrical tape now comes in white, and if you use Washi tape, the color and width possibilities are endless!